I want to import sklearn but there is no module apparently:
ModuleNotFoundError: No module named 'sklearn'I am using Anaconda and Python 3.6.1; I have checked everywhere but still can't find answers.
When I use the command:conda install scikit-learn should this not just work?
Where does anaconda install the package?
I was checking the frameworks in my python library and there was nothing about sklearn only numpy and scipy.
Please help, I am new to using python packages especially via anaconda.
114 Answers
You can just use pip for installing packages, even when you are using anaconda:
pip install -U scikit-learn scipy matplotlibThis should work for installing the package.
And for Python 3.x just use pip3:
pip3 install -U scikit-learn scipy matplotlibBrief Introduction
When using Anaconda, one needs to be aware of the environment that one is working.
Then, in Anaconda Prompt one needs to run the following
conda $command -n $ENVIRONMENT_NAME $IDE/package/module$command - Command that one intends to use (consult documentation for general commands)
$ENVIRONMENT NAME - The name of one's environment (if one is working in the root,conda $command $IDE/package/module is enough)
$IDE/package/module - The name of the IDE or package or module
Solution
Will leave below two options that may help one solve the problem.
Option 1
If one wants to install it in the root and one follows the requirements - (Python (>= 2.7 or >= 3.4), NumPy (>= 1.8.2), SciPy (>= 0.13.3).) - the following will solve the problem:
conda install scikit-learnLet's say that one is working in the environment with the name ML.
Then the following will solve one's problem:
conda install -n ML scikit-learnNote: If one needs to install/update packages, the logic is the same as mentioned in the introduction. If you need more information on Anaconda Packages, check the documentation.
Option 2
If the above doesn't work, on Anaconda Prompt one can also use pip (here's how to pip install scikit-learn) so the following may help
pip install scikit-learnIf you are using Ubuntu 18.04 or higher with python3.xxx then try this command
$ sudo apt install python3-sklearn then try your command. hope it will work
I did the following:
import sys
!{sys.executable} -m pip install sklearnI've tried a lot of things but finally, including uninstall with the automated tools. So, I've uninstalled manually scikit-learn.
sudo rm -R /home/ubuntu/.local/lib/python3.6/site-packages/sklearn
sudo rm -R /home/ubuntu/.local/lib/python3.6/site-packages/scikit_learn-0.20.0-py3.6.egg-infoAnd re-install using pip
sudo pip3.6 install -U scikit-learnHope that can help someone else!
This happened to me, I tried all the possible solutions with no luck!
Finaly I realized that the problem was with Jupyter notebook environment, not with sklearn!
I solved the problem by re-installing Jupyter at the same environment as sklearn
the command is: conda install -c anaconda ipython. Done...
The other name of sklearn in anaconda is scikit-learn. simply open your anaconda navigator, go to the environments, select your environment, for example tensorflow or whatever you want to work with, search for scikit_learn in the list of uninstalled packages, apply it and then you can import sklearn in your jupyter.
SOLVED:
The above did not help. Then I simply installed sklearn from within Jypyter-lab, even though sklearn 0.0 shows in 'pip list':
!pip install sklearn
import sklearnWhat I learned later is that pip installs, in my case, packages in a different folder than Jupyter. This can be seen by executing:
import sys
print(sys.path)Once from within Jupyter_lab notebook, and once from the command line using 'py notebook.py'.
In my case Jupyter list of paths where subfolders of 'anaconda' whereas Python list where subfolders of c:\users[username]...
Cause
Conda and pip install scikit-learn under ~/anaconda3/envs/$ENV/lib/python3.7/site-packages, however Jupyter notebook looks for the package under ~/anaconda3/lib/python3.7/site-packages.
Therefore, even when the environment is specified to conda, it does not work.
conda install -n $ENV scikit-learn # Does not workSolution
pip 3 install the package under ~/anaconda3/lib/python3.7/site-packages.
Verify
After pip3, in a Jupyter notebook.
import sklearn
sklearn.__file__~/anaconda3/lib/python3.7/site-packages/sklearn/init.py'
install these ==>> pip install -U scikit-learn scipy matplotlib if still getting the same error then , make sure that your imoprted statment should be correct. i made the mistike while writing ensemble so ,(check spelling) its should be >>> from sklearn.ensemble import RandomForestClassifier
I had the same issue as the author, and ran into the issue with and without Anaconda and regardless of Python version. Everyone's environment is different, but after resolving it for myself I think that in some cases it may be due to having multiple version of Python installed. Each installed Python version has its own \Lib\site-packages\ folder which can contain a unique set of modules for that Python version, and where the IDE looks into folder path that doesn't have scikit-learn in it.
One way to try solve the issue: you might clear your system of all other Python versions and their cached/temp files/system variables, and then only have one version of Python installed anywhere. Then install the dependencies Numpy and Scipy, and finally Scikit-learn.
More detailed steps:
- Uninstall all Python versions and their launchers (e.g. from Control Panel in Windows) except the one version you want to keep. Delete any old Python version folders in the Python directory --uninstalling doesn't remove all files.
- Remove other Python versions from your OS' Environment Variables (both under the system and user variables sections)
- Clear temporary files. For example, for Windows, delete all AppData Temp cache files (in C:\Users\YourUserName\AppData\Local\Temp). In addition, you could also do a Windows disk cleanup for other temporary files, and then reboot.
- If your IDE supports it, create a new virtual environment in Settings, then set your only installed Python version as the interpreter.
- In your IDE, install the dependencies Scipy and Numpy from the module list first, then install Scikit-Learn.
As some others have suggested, the key is making sure your environment is set up correctly where everything points to the correct library folder on your computer where the Sklearn package is located. There are a few ways this can be resolved. My approach was more drastic, but it turns out that I had a very messy Python setup on my system so I had to start fresh.
Using Anaconda-navigator UI environment
When running Anaconda-navigator:
Choose the 'Environments' tab on the left and create a new environment (e.g. ML - see Gonçalo Peres answer above, I made one called 'CourseraML').
Set Python version 3.7 (for Coursera course Applied Machine Learning in Python). Also include R.
Then find modules to install using the 'not installed' drop-down menu item. Search for each module needed in the search bar and select. sklearn is part of scikit-learn. Select it and install (it should find all relevant dependencies). Modules needed for Applied ML course: seaborn, numpy, scikit-learn, pandas, matplotlib
You'll need to restart Jupyter Notebook and reopen your file.
Command line version of above:
conda install -n CourseraML seaborn scikit-learn pandas numpy matplotlib graphvizCauses-your jupyter notebook might be importing the sklearn and other libraries from the another the location(path) than the libraries from conda or pip.
MY ProblemIn my case, My jupyter notebook was importing the libraries for snap manager. Since, I install jupyter using the snap instead of other ways.
You can check where other libraries are being imported in jupyter using code:
import cv2 as cv
print(cv.__file__)SolutionSo , I uninstall jupyter notebook and then install notebook using conda.
sudo snap remove jupyter conda install -c conda-forge notebook
I had the same problem. The issue is when we work on multiple anaconda environments, not all packages are installed in all environments. you can check your conda environment by writing the following code in anaconda prompt:
conda env list
then you can check the packages installed in each environment :
conda list -n NAME_OF_THE_ENVIRONMENT
for me, the environment that I was working with , was missing sklearn, although the package was installed in the other environments.
therefore, I just simply installed sklearn package in that particular environment
conda install -n NAME_OF_THE_ENVIRONMENT scikit-learn
and the issue was resolved
